幸运飞艇---欢迎您!

Contact: Mr. Xu 135-8498-1144
Fax: 0512-55171609
E-mail:paul-x@163.com
Web:www.petroxcel.com
Address: Zu Road, Kunshan 1666 Technology Building Room 112-203

Product

Position:Homepage|Breuckmann

Data_sheet_stereoSCAN-HE

Date:2015/4/5 23:40:40 Hits:6274

Data_sheet_stereoSCAN-HE

Data Sheet
stereoSCAN 3D-HE, 4.0 MegaPixel

Technical Specifications
Fields of View
Annotation:

All fields of view (FOV) can be realised with the same basic components, cameras and projection unit just by changing the objectives of the cameras / projector and – if necessary – the position of the cameras. 
 
To simplify the setup and calibration of the standard measuring ranges, they will be offered only with a special tested set of lenses for each FOV. The lenses will be delivered with a factory setting for the aperture and focal depth, which is optimised for the corresponding FOV and which must not be changed by the user.

Please note:

All data specified in this data sheet apply to single captures only.  
 
The measurement specifications given are average values for the central measuring range achieved under defined measurement conditions and after precise calibration of the sensor. They solely apply in combination with the measuring and evaluation setup provided by Breuckmann. Furthermore, all accuracy and resolution details depend on the object surface and the scanning conditions. 
 
(1) All values stated in this data sheet are approximated values, indicating the order of the value. For example, the field of view '400'  may have an image diagonal between 375 and 425 mm. 
(2) Size of FOV refers to zero level. 
(3) Maximum extension in z-direction. 
(4) The values for lateral resolution are theoretically calculated (ratio of the field of view and pixel number of camera chip)  
(5) The resolution limit is defined as the theoretical accuracy (ratio of the field of view and pixel number of camera chip). 
(6) The noise value is measured as deviation of the measured points against a best-fit curve. The noise of the measured 3D data highly depends on the noise of the camera chip. 
(7) The feature accuracy is defined according to the VDI guideline 2634/2.

Contact:Mr. Xu 13584981144  Fax:0512-55171609
Address:Zu Road, Kunshan City, 1666 Technology Building Room 112-203
Copyright © 2015-2020 Reserved:Kunshan Sea Technology Co., Ltd. 
Homepage|About Us|Product|News|Feedback|Contact
Webmaster Statistics Baidu statistics